Detailed instructions for the Beatbox Blackbird are coming soon. In the meantime, refer to the video below for specific installation steps
To prepare your van for installation, many of the steps for the Beatbox Blackbird are the same as for the previous version, the 10" Beatbox. Refer to the 10" Beatbox guide for steps on how to disconnect the chassis battery, remove the seats, remove the floor, remove the wire chase cover and access other necessary areas.
Beatbox Blackbird Installation Walkthrough
In the video above, sections are:
00:09 Removing the Door Panel
06:53 Preparing the Boot
08:40 Loosening the Driver Seat
09:59 Removing the Wire Tray
12:14 Trimming the Wire Tray
13:10 Preparing the Speakers
14:32 Installing the Door Speakers
16:15 Removing the EK1
16:44 Under the Driver’s Seat
17:37 Running Door Wires
22:24 Installing the Tweeters
26:27 Reinstalling Door Panels
29:25 Installing Subwoofer Knob
31:44 Wire Routing
33:55 Subwoofer Installation
Note: after plugging in the wires, secure them to the wire bracket by following the instructions in this video. This happens at about 36:30 in the main installation video.
38:10 Power Wires